A layout is a drawing of one model’s piece outlines in their assembled places, with no pattern. If you design in a CAD or vector tool, you probably have one already, and importing it does the assembling for you.
Import a layout
In the Assemble step, open Arrange in the toolbar at the bottom of the board and choose Import layout SVG…. TessaFab slides every printed piece onto the outline it matches:
- A piece printed turned (pieces are often turned to fit the bed) is turned back. A piece that fits an outline by sliding alone is never turned.
- Pieces are never mirrored.
- Identical pieces are shared out so they keep the same arrangement on the bed as in the drawing.
When you open a sliced file, a <name>.layout.svg beside it is imported automatically.
Export a layout
Export layout SVG…, in the same menu, writes your current assembly as a layout.
Drawing one by hand
- Draw at 1:1 in millimetres.
- Each piece is a closed, unfilled shape with a black stroke (
#000000). - Optionally, the root
<svg>can carry where the pattern sits:data-pattern-rotate="-45": degrees, counter-clockwisedata-pattern-origin="105.9 105.9": millimetres from the layout’s bottom-left corner
<svg xmlns="http://www.w3.org/2000/svg" width="100mm" height="70mm" viewBox="0 0 100 70"
data-pattern-rotate="-45">
<rect x="0" y="0" width="50" height="70" fill="none" stroke="#000000" stroke-width="0.3"/>
<rect x="50" y="0" width="50" height="70" fill="none" stroke="#000000" stroke-width="0.3"/>
</svg>
Tip. Layout import finds a turned piece by lining up its long outer edges with the outline’s. A piece with no clear edges (a disc with a small notch, say) printed turned may need turning by hand in Assemble.